Fiberbuilt Studio Golf Mat, Single Hitting, 7' x 4'
A Fiberbuilt Grass studio mat with the hitting panel on one side and a 2 ft spacer on the other for a floor launch monitor or a ball tray.
Send us your room and we will check it for free. Book a design call or call (512) 222 2220.
A hitting mat that takes the jolt out of fat shots.
Fiberbuilt Grass lets the club slide down and through the hitting panel instead of stopping hard on impact, so mishits are easier on your wrists and elbows than on a standard mat. The panels sit in a modular rubber foundation that stays flat and stays put, on concrete, in a garage or over carpet.
What you get with the 7 x 4 ft Single Hitting mat
The club slides through, not into, the mat
The nylon hitting panel is coated with UV inhibitors and lets the club keep moving through impact, so you avoid the turf shock of a traditional mat. Each panel carries a 300,000 shot guarantee.
Room for a floor launch monitor
The 2 ft spacer on the open side holds an optical unit like a Foresight, SkyTrak or Ernest Sports, or a ball tray. The mat works for a righty or a lefty.
Rubber tees or real tees
Each hitting panel has 4 tee holes. Use the included 2.625 in rubber tee, or drop in the friction fit holder and tee up a real tee.
Pins together in the room
The rubber foundation comes in pieces that pin together with a rubber mallet. The hitting panel goes in first, then the stance and spacer turf. At 141 lb it stays flat and does not slide.
See the Grass Series studio mats
Fiberbuilt walks through the hitting panel, the stance turf and the rubber foundation.
Pick the layout for your launch monitor
Every Grass Series studio mat uses the same hitting panel and rubber base. The difference is where the panel sits.
4 ft deep mats fit most home bays. 6 ft deep mats give a longer hitting panel with 6 tee positions.
What's included and full specs
Made by Fiberbuilt. Specs from Fiberbuilt.
Size
Build
Use
Warranty
7 x 4 ft Single Hitting questions
Something else? Call or text (512) 222 2220, Monday to Friday, 9 to 6 Central.
Which launch monitor fits this layout?
Fiberbuilt sets this layout up for optical units that sit beside the ball, like Foresight, SkyTrak and Ernest Sports. The 2 ft spacer is where the unit or a ball tray goes.
Can it go on carpet or in a garage?
Yes. Fiberbuilt rates these mats for indoor and outdoor use. On carpet, light duty two way carpet tape under the frame keeps it from creeping. In a garage or outside, set it on a firm, level floor like concrete.
What goes under it?
Nothing. The rubber foundation is the base, so it sits right on the floor. Fiberbuilt does not recommend setting it on bare ground or grass.
How do I keep it clean?
Pressure wash the hitting panel once a year, more often with heavy use. Pull the stance and spacer turf off the base and wash it every few months. Rotate the hitting panel 180 degrees as wear shows.
Fiberbuilt or Holy Grail?
Holy Grail is the softer option, made to cut into a turf covered simulator floor in a climate controlled room. Fiberbuilt is heavier and firmer, sits on its own rubber base, and is our pick for carpet, an unconditioned garage or outdoor use.
What is the warranty?
Fiberbuilt covers defects in workmanship or material for 1 year. Stance and turf mats carry a limited 1 year warranty and the rubber base a 5 year limited warranty.
What owners say
